Changing vehicle’s oil at regular intervals is a vital part of keeping your vehicle engine better forits performance and longer life existence. The purpose of engine oil is to keep the internal parts of your vehicle’s engine lubricated and cool. It keeps the moving parts from grinding against each other causing wear and damage. Without frequent oil changes, dirt and sludge can build up in the engine, and old, dirty oil won›t lubricate the moving parts. Dirty oil leads to serious damage, and if things get bad enough, there may be an engine replacement in your future. Changing your oil is a simple and relatively inexpensive pro-cedure, depending on type of vehicle; you can get your oil changed at a lube shop or dealership according to kilometer frequency with Me Cool engine Oil.
When you›re considering a type of oil to purchase, look for the «starburst» and «donut» seals from the Amer-ican Petroleum Institute (API) on the bottle. These identify that the oil meets the API›s service standards,and will help keep you away from the lower quality oils. The API›s current highest rating for motor oil is SM.This oil is intended for all gasoline engines currently in use and has been the standard since 2004. For diesel engines, the current top oil rating is CI-4. In the API›s words, SM oils are «designed to provide improved oxi-dation resistance, improved deposit protection, better wear protection, and better low-temperature perfor-mance over the life of the oil» [source: API]. Me Cool Engine oil has API Standard and it consist all kind of relevant additives and chemicals which will help out to protect the engine under any circumstances.Older types of motor oil (category SA thru SH) are considered obsolete but are often still on the market.Customers who don›t know any better may inadvertently purchase these oils. For instance, SA oils contain no additives and could lead to higher emissions and engine damage in cars built after 1930. And category SJ protects all gasoline engines from 2001 (and earlier), so everything below the grade of SJ is consideredIn 2004, the Alliance of Automobile Manufacturers conducted a study that compared SL oil — which at the time of the study was the top standard and is still usable today — to SA oil in modern engines. The results were that the engines that used SA oil had more wear and more sludge than the SL engines. The SA engines had excessive deposits and wear, and were more likely to lead to catastrophic engine failure. Now that you know why you should purchase only Me-Cool engine is because it has the standard of API SL. It is only the grade which prevents higher emission and other engine damages. Me Cool Engine Oil is manufactured in United Arab Emirates, highly concentrating on quality at its every level of process, Excellent product properties are developed through steam and electronic means controlled through laboratory test including the desirable degree of contents and the elevation of oil. Our high quality products are characterized by exceptional technical properties – high resistance – balanced strength and defect free for achieving excellence. Me-Cool engine oil is a blend of oils selected to enhance adhesive properties for better distribution and to provide lubrication for longer periods than ordinary oils. The frequent use of Me-Cool engine oil prevents deterioration of engines and will give a longer life to vehicle engines.